Autel TPMS MX-Sensor 315MHz 433MHz Universal Programmable Tire Pressure Sensors

  
Autel TPMS MX-Sensor 315MHz 433MHz Universal Programmable Tire Pressure Sensors. (Screw-In) 315 + 433MHz OE-Level 100% Clone. Able Programmable Sensor Fits 98% Mainstream Vehicles. To service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no.

With the original sensor ID and put in the same position. The latest and most comprehensive coverage of. 90% of North American, European and Asian vehicles. It nearly fits all types of wheels on the road. Release valve design makes the manual sensor replacement much easier.

Also it allows easy stem removal from sensor head, and. Easily programmed wirelessly even when they have already been mounted. High-quality MX-Sensor is tested and certified to meet SAE industry standard J1205/J1206 testing. Prevent air leakage, this sensor ensures superior stability and performance. Autel guarantees that the sensor is free from material and manufacturing defects for a period of 24 months or for 24,000 miles.

As one of the world's leading manufacturers in the automotive aftermarket, dedicates itself to developing. Diagnostic tools and translating global clients' needs into. And innovative products with strong R&D and production capabilities. Both 315MHz + 433MHz frequencies into one TPMS sensor with.

100% ID clone-able with no relearn required. Patented PRESS release valve stem design. Or exceed OEM sensors in frequency strength and durability. Been manufactured to combine both 315 MHz and 433 MHz applications in one sensor to greatly simplify users' inventory management and lower the investment as well as sales loss.

In terms of signal, durability and. An easy to use and. Necessity for any shop performing TPMS repairs, the Autel 1-SKU sensor. Over 98% of all OE sensors on the market. Support up 90% of North American, European and Asian. On the shop level, needing only. To service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency.

With both rubber and metal accessory valve stems available, our accessory valve kits minimize service time and provide a quick assembly for installation. The patented press release valve design. Interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. 1-Sensor to be easily programmed wirelessly even when the sensors have already been mounted.

MX-Sensor is 100% clone-able with an Autel latest wireless. No relearn is required when the MX-Sensor is cloned with the.

Sensor ID and put in the same position. With the highest quality materials and advanced TPMS technology. Provides superior battery life and reliability, to match OE sensor battery performance. Body weighs only 12g, making it significantly lighter than most sensors in the market, which. Better sensor stability and performance.

Are free from manufacturing defects for a period of 24 months or 24,000 miles, whichever option comes first. Each Autel MX-Sensor has a series number for assuring quality control. The series number is imprinted on the sensor or can. Quality from our factory manufacturing to ensure only the highest quality parts are installed. Loosening the tire: Remove the valve cap and core and deflate the tire.

Use the bead loosener to unseat the tire bead. Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o. Clock relative to the tire.

Tire tool and lift the tire bead onto the mounting head to dismount the bead. From the valve stem, and then remove the sensor assembly from the rim. Connect the sensor body and valve stem at a suitable angle. Use the maximum angle of 30. Remove the screw nut from the valve.

Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim. With 4.0Nm with the help of the. Mounting the tire: Place the tire on the rim, make sure that the valve faces the. Head at an angle of 180. Mount the tire over the rim.

Sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS. Sensor programming tools for your specific vehicle make, model and year before installation. Do not install programmed TPMS sensor in damaged wheels. Optimal function, the sensor may only be installed with original valves and accessories provided by Autel.

Each time a tire is serviced or dismounted, or i. Or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. To replace the sensor if it is extremely damaged. Autel MX-Sensor arrive blank and must be programmed with an Autel TPMS service tool prior to installation or at 0 PSI/kPa.

Do not race with the vehicle on which the Snap-in MX-Sensor is mounted, and always keep the drive speed under. Autel guarantees that the sensor. Material and manufacturing defects for a period of 2. Your vehicle, or any questions. Operating Temperature: -40°C - 125°C. Storage Temperature: -40°C t - 125°C. Temperature Reading Range: -40°C - 125°C.

G Sensor Reading Accuracy: ±15%. 42.424.116.0 mm. Otherwise an Unpaid Item case will be opened to you.

We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse. 12 months free repair for the devices. 3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics.

For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands. And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.