All grade 8 coated hardware. Additionally there may be variations in the length of the grade 8 bolts as well as the color of the primer. However i will use the most quality parts and components available.I try to get them out as soon as I can, but this is mostly a weekend operation for me. Now with x and y axis tension adjustment bolts!
A quick note on how to use this! Instead of trying to place your bar in the smaller tube have a look at the last pic for how to leverage the rubber on and off the rim.
Th is pic comes from a you tube video, and this is a safe method of spinning the duck head around. I'm no good at changing tires on it without this tool. Once you try it this way its actually pretty fun. Use plenty of lube or soapy water and it is much much easier.Now with grade 8 coated 3/4 hardware. The pipe is thick, Thicker than it looks. It looks like 16 gauge to me (Thinner than 11 gauge). This adapter fits over that red pipe. The arm that holds the 90 Degree drop down is also 11 gauge. The 90 Degree drop down is also 11 gauge. I know the welds are elementary... The welds have good penetration. Manual Tire Changer Swing Arm Mod with Duck Head / Duckbill Demount. This is a kit and may require some modification.
It is home made the welds are ugly but they are complete. It will do the job surprisingly well. It can do a 20 wheel perhaps larger 22'' if the humidity is right... Tire changer duck bill modification kit.It is basic but it works surprisingly well. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Tire Changers/Wheel Balancers". The seller is "atari33" and is located in this country: US. This item can be shipped to United States.